READ FIRST
WARNING
INSTRUCTION MANUALS
Do not install, maintain, or operate this equipment without reading,
understanding and following the proper manufacturer’s instructions and
manuals, otherwise injury or damage may result.
RETURN OF EQUIPMENT
All Flowmeters and/or Signal Converters being returned to the
manufacturer for repair must be free of any hazardous materials (acids,
alkalis, solvents, etc). A Material Safety Data Sheet (MSDS) for all
process liquids must accompany returned equipment. Contact the
manufacturer for authorization prior to returning equipment.
Read these instructions before starting installation;
save these instructions for future reference.
Contacting the factory
Should assistance be required with any of the manufacturer’s products, contact the following:
Telephone:
Automation Services Call Center
1-800-HELP-365
E-Mail:
ins.techsupport@us.abb.com
10D1475 MINI-MAG MAGNETIC FLOWMETER INSTRUCTION MANUAL
V
To Next Page
Loading...
Need help?
General
