SPECIFIC
CAUTIONS
Do not use graphite gaskets. Under certain conditions they may
cause an electrically conductive layer to form on the inside wall of
the meter, causing meter operation to degrade. (pg. 2-8)
Some of the IC devices used in the signal converter are static
sensitive and may be damaged by improper handling. When adjust-
ing or servicing the signal converter, use of a grounded wrist strap
is recommended to prevent inadvertant damage to the integral solid
state circuitry. (pg. 4-1)
10D1475 MINI-MAG MAGNETIC FLOWMETER INSTRUCTION MANUAL
SAFETY SUMMARY II
To Next Page
Loading...
