Navigator 600 Series Analyzers
Silica and Phosphate Appendix B – Acyclic Parameter Mapping
IM/NAV6PBS Issue 1 47
5 0 Calibration in progress 1
1 In manual test settings 1
2 Annual service in progress 1
3 Solution replacement in progress 1
4 Excessive zero offset 1
5 Calibration factor too high/low 1
6 Next annual service due in x days 1
7 Next annual service overdue 1
6 0 Less than x days reagent left 1
1 Less than x days zero calibration solution left 1
2 Less than x days secondary calibration solution left 1
3 Less than x days cleaning solution left 1
4Media card full 1
5 Internal communications failure 1
6
7
Octet Bit Description Diagnosis Mask (1 = enabled)
Table B.2 Diagnostic Data (Sheet 3 of 3)
To Next Page
Loading...
