ABB NEXUS Series - Network Protocol Configuration (Modbus, BBMD, Time Sync)

NEXUS Series | Software Configuration
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
27
MAN0125 Rev 20
BBMD SETTINGS
The BBMD settings area is used to configure the BACnet/IP Broadcast Management Device (BBMD) table setup for
BACnet networks.
MODBUS NETWORK PROPERTIES
The Modbus Network Properties page is used to set the configuration for Modbus communications.
TIME SYNC SETTINGS
The Time Sync Settings area provides the ability to configure BACnet network time synchronizations.