ABB NEXUS Series - System Logs and Diagnostic Buffer

NEXUS Series | Software Configuration
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
33
MAN0125 Rev 20
SYSTEM LOGS
The System Logs area provides users with the ability to view and download messages generated by the NEXUS
Series device and the Aspect control engine. The System Logs area provides the following logs:
• Diagnostic Buffer - provides kernel operating system output for the device. The information shown
here is for diagnostic purposes and may be referenced during troubleshooting session with Cylon
Controls.
• Remote Logging - The Remote Logging page is used to allow or disallow centralized syslog messaging. All
Aspect targets support the ability to send their log information to a centralized Aspect target or IT-
supported syslog server.
• System Log - contains information processed by the sub-level operating system outside of Aspect
• Update Log- shows any recent YUM updates in the system.
DIAGNOSTIC BUFFER
The Diagnostic Buffer provides diagnostic information regarding the NEXUS Series device hardware and OS
details.
REMOTE LOGGING
The Remote Logging page is used to allow or disallow centralized syslog messaging. All Aspect targets support
the ability to send their log information to a centralized Aspect target or IT-supported syslog server.