1SCC303002M0204, rev. D
6
Installation and operating instructions, OTM_C 3. Quick start
3. Quick start
This is a quick guide only meant for those who need a reminder of how to operate the unit. For more
detailed instructions, see chapter 6.
3.1 Operating the motorized change-over switch electrically;
remote control
To operate the motorized change-over switch electrically:
1. Remove the handle from the switch panel. You can remove the handle in all
positions (I, 0, II).
2. Turn the Motor/Manual selector to the Motor (M) position to enable electrical operation.
Figure 3.1 Operating the motorized change-over switch electrically; remote control
3.1.1 Locking electrical operation
To disable electrical operation, lock the locking latch with a padlock. After the locking latch has been
locked, the motorized change-over switch cannot be operated electrically. You can lock electrical
operation in all positions (I, 0, II).
Figure 3.2 Locking electrical operation
To Next Page
Loading...
