ABB PSR User Manual

To connect the PST Softstarter to a Probus DP eldbus system...
you need specic software for PLC set-up, (GSD le) which is available at www.abb.com/lowvoltage
on the Softstarter pages. Look under the documentation-link named Software. If you need help or
advice, please contact your local ABB ofce.
PDP21 is replaced by PDP22.
Use PDP22 with the GSD-le Abb_082d.gsd regardless if the PLC is a DP/V0 or DP/V1.
Purple cable
PDP22-FBP
PDQ22-FBP
2CDC 341 048 F0006
2CDC34101S0010
52 Softstarters | 1SFC132005C0201, rev.F
FBP FieldBusPlug
Probus DP, ordering details
Probus DP FieldBusPlug
Ready-made Probus DP eldbus interface with various cable lengths.
• Supports PROFIBUS DP V0 and V1
• Applicable on all FBP motor starters and other devices
• Degree of protection IP65, diagnostic LED
Designation Cable length Type Order code
Pack
ing
piece
Weight
kg
1 piece
Probus DP FBP 0.25 m PDP22-FBP.025 1SAJ 240 100 R1003 1 0.09
Probus DP FBP 0.50 m PDP22-FBP.050 1SAJ 240 100 R1005 1 0.10
Probus DP FBP 1.00 m PDP22-FBP.100 1SAJ 240 100 R1010 1 0.13
Probus DP FBP 2.00 m PDP22-FBP.200 1SAJ 240 100 R1020 1 0.20
Probus DP FBP 5.00 m PDP22-FBP.500 1SAJ 240 100 R1050 1 0.36
Probus DP FieldBusPlug for 4 devices
PDQ22 is a member of the ABB FieldBusPlug family of bus connectors. It allows the connection of
up to four devices to Probus DP by just using one Probus node access. This allows a cost efcient
device integration for devices that are located physically nearby. PDQ22 supports DP-V0 and DP-V1.
The degree of protection is IP66. There are separate diagnosis LEDs for bus and device status.
Note that the accessorie PDQ22-FBP only works with the PSR and PSE and not with the PST(B) softstarter.
Designation Type Order code
Pack
ing
piece
Weight
kg
1 piece
Quadruple bus connector PDQ22-FBP 1SAJ 240 200 R0050 1 0.20
DINrail adapter for PDQ22-FBP CDA11-FBP. 0 1SAJ 929 300 R0001 1 0.11
Fixing bracket for passive plug of
connection cable
CDP11-FBP.0 1SAJ 929 100 R0001 1 0.50
Conguration software
This cable and software can be used for set-up and comissioning of the softstarter as well as to keep
back-up of the parameter settings.
Designation Type Order code
Pack
ing
piece
Weight
kg
1 piece
USB to FBP interface cable
UTF21-FBP 1SAJ 929 400 R0002 1
PDP22/PDQ22 Device Type Manager (DTM) incl.
FDT/DTM frame application
PBDTM-FBP 1SAJ 924 012 R0003 1

ABB PSR Specifications

General

Type	PSR
Protection Class	IP20
Category	Controller
Rated control supply voltage	24 V DC
Certifications	CE
Operating Temperature	-25°C to +55°C