ABB PSTX Series - 6.1 HMI Navigation and Parameter Access; HMI Navigation Methods; Parameter List Access

Softstarters Type PSTX30...PSTX1250 User Manual short form 1SFC132082M9901 13
EN
The softstarter has 10 keys on the keyboard, see chapter 5 for details of
the key function.
Menu
Push to go to the menu and then use or to select a menu item.
Push to make your selection, see figure 1, graphics 14. The settings
in the HMI can be set with numerical setting, switch setting or selection
lists.
The numerical setting
Use the numerical setting when a numerical value is to be set in the
softstarter.
Use
and key to select a figure, a black board highlights the selected
figure. Then push or to change the value of the selected figure.
Push
, to save. See figure 2, graphics 14.
On/off switch
With the switch you can select 1 or 0 (on or off). Use
and , a black
board highlights the selected switch. Then push
or to change the
value of the selected switch. Push , to save. See figure 3, graphics 14.
Selection list
Use
or , a black board highlights the selected option.
Push
, to save.
See figure 4, graphics 14.
Menu u Parameters
Push , Menu, to enter the menu. Use or to select Parameters
and then push
, Select.
• Complete list - Set parameters
• Favourites - Create your own parameter list
• Modied - All parameters that differs from default
You can find the most common parameters in table 6.7.
6.4: Navigation overview
6.5: Parameters
14