The options menu have the following selectable sub menus:
• Edit home view
• Active faults/protections
• Active warnings
• Security management
Active faults/protections and Active warnings gives information about any
fault, protection and warning that have occurred during operation. For fault
solution see chapter 7 Trouble shooting.
See gure 5, graphics 14.
For the sub-menues “Edit home view” and “security management” see
1SFC132081M0201 - Softstarters Type PSTX30...PSTX1250, Installation and
Commissioning Manual available on: http://www.abb.com/lowvoltage.
The motor can start unexpectedly if there is a start signal present, while you
do any of the procedures below:
•
Change from one type of control to a different one (i.e. eldbus control to
hardwire control or local to remote control)
•
Reset events
•
If you use automatic event reset
•
If you use Auto restart
To Next Page
Loading...
