ABB PSTX720 - Page 185

1SFC132081M0201 | Installation and commissioning manual | Index 185
• Fieldbus Inputs/Outputs 90
Fieldbus address 90
Fieldbus control 90
Fieldbus failure operation 90. See alsoFieldbus failure protection
Fieldbus failure protection 103
Fieldbus Inputs/Outputs 90
Frequence range protection 99
Full voltage 9
Full voltage start 77
Functional ground - terminal 22 38
Functions 69
H
Handling when mounting 31
Heatsink over temperature fault 112
High current fault 114
HMI 9
How to set a parameter 53
How to start/stop the motor 15
Human-Machine Interface 9
Humidity 21
I
Ie 9, 22
i-key 51
Individual function 70
Inputs/outputs 85
• Analog output 88
• Digital inputs (DI) 86
• Relay outputs 87
• Temperature sensor 89
Insulation 22
Internal fault 110
• Internal fault 110
Internal faults 111
Internal IO 85
K
Keypad
• i-key 51
• Navigation keys 51
• R\L-key 51
• Start key 51
• Stop key 51
Kick start 80
L
Language 65
LED 9
LED indicators 50
LED status 50
Limp mode 116
Line contactor close time 116
Local control from keypad 54
• R\L-key 54
• Start key 54
• Stop key 54
Locked rotor protection 95
Locked rotor warning 104
Low supply voltage fault 114
Under voltage warning 106
M
Main circuit 36
Maintenance 137
Maximum mounting angle 32
Max number of starts protection 96
Menu screen 58
• Favorites 60
• Modified 60
• Parameters 58
Minimum distance to wall/front 31
Minimum enclosure size 32
MINI USB interface 133
Modbus configuration warning 109
Motor Current Ie 71
Motor heating 82
Motor jog 55
Mount 31
Mounting Detachable HMI 33
N
Navigation keys 51
Navigation Overview 50
Navigation screen 52
Normal current limit 79
O
On/off switch 52
Open circuit thyristor fault 112
Optional accessories 46
Options screen 56
Output relay 22
Overview 18
Overview of faults, protections and warnings 143
Over voltage protection 98
Over voltage warning 106
P
Parameter changed 62
Parameters 58
• Complete list 58
Phase loss fault 113
Phase reversal protection 99
PLC 9
Pollution degree 21
Power factor underload protection 97
Power factor underload warning 105
Presentation settings 64
Pre-start 70
Programmable inputs (Sequence start) 42
Programmable inputs - terminals 15, 16 and 17 41
Programmable output relay - K4, terminals4,5and6 43
Programmable output relay - K5, terminals7,8 and9 43
Programmable output relay - K6, terminals10,11and12 43
Protection 21
Protection functions 18
Protection indication 145, 148
Protection indication shown on screen 145
Protections 62, 94
PT100 89
PTC 89
14