ABB REB670 - View Trip Values; Trigger a Disturbance Report Manually

Main menu/Disturbance records/Record xx/Event recording
8.2.4 View trip values
In the Trip values section of a disturbance recording both the pre-fault and the fault
values for current can be viewed. The recording number and Trig time are also
displayed. The path in the HMI is shown below.
Main menu/Disturbance records/Record xx/Trip Values
8.3 Trigger a disturbance report manually
Using the manual trigger generates an instant disturbance report. Use this function
to get a snapshot of the monitored line. Follow the path below and answer yes in
the Execute manual trig dialog box.
Main menu/Disturbance records/Manual trig
Section 8 1MRK505209-UEN E
Handle disturbances
40
Operator's manual