ABB REB670 - Monitoring; Event Counter CNTGGIO; Overview; Logic

9.3.8 Monitoring
9.3.8.1 Overview
Event counter settings are found under Monitoring in the Setting Group N menu.
9.3.8.2 Event counter CNTGGIO
Main menu/Setting/Setting group N/Monitoring/EventCounter(GGIO)/
CNTGGIO:x
Here the function can be set on or off.
9.3.9 Logic
9.3.9.1 Overview
Under Logic there are settings for Trip logic, Trip matrix, Logic gate, Logic SR
memory and Logic timer set. Under each of these function categories there are a
number of instances, each with a parameter set.
9.3.9.2 LogicGate
Main menu/Settings/Setting group N/Logic/LogicGate/GATE:x
Displays parameter settings for Operation (On or Off).
9.3.9.3 LogicRSMemory
Main menu/Settings/Setting group N/Logic/LogicRSMemory/RSMEMORY:x
Displays setting parameters for operating mode of memory function.
9.3.9.4 LogicSRMemory
Main menu/Settings/Setting group N/Logic/LogicSRMemory/SRMEMORY:x
Displays setting parameters for operating mode of memory function.
9.3.9.5 LogicTimerSet
Main menu/Settings/Setting Group N/Logic/LogicTimerSet/TIMERSET:x
Displays settable parameters for Operation (On or Off) and delay for settable timer.
Section 9 1MRK505209-UEN E
Read and change settings
62
Operator's manual