ABB REB670 - Circuit Switch SXSWI; Function for Energy Calculation and Demand Handling ETPMMTR; LDCM Clear Counters; Reset Disturbances and Event List DRPRDRE

13.2.2.3 Circuit switch SXSWI
The circuit switch counter is reset under Reset counters in the HMI tree.
Main menu/Reset/Reset counters/CircuitSwitch(XSWI)/SXSWI:x
In the dialog box that appears, choose YES to reset.
13.2.2.4 Reset event counter CNTGGIO
The event counter is reset under Reset counters in the HMI tree.
Main menu/Reset/Reset counters/EventCounter(GGIO)/CNTGGIO:x
13.2.2.5 Reset pulse counter PCGGIO
The Pulse counter is reset under Reset counters menu in the HMI tree.
Main menu/Reset/Reset counters/PulseCounter(GGIO)/PCGGIO:x
In the dialog box that appears, choose YES to reset.
13.2.2.6 LDCM clear counters
Main menu/Reset/Reset counters/LDCMCommunication/LDCMX
Activating Reset of LDCM counters sets the counter concerned to zero. A reset can
be performed by affirmation in the dialog box. This is done by pressing the E key
when YES is highlighted.
13.2.2.7 Function for energy calculation and demand handling ETPMMTR
Main menuReset/Reset counters/ThreePhEnergMeas(MMTR)/ETPMMTR:x
Resetting accumulated energy values and the maximum demand values.
13.2.3 Reset disturbances and event list DRPRDRE
Disturbances are reset under Reset menu in the HMI tree.
Main menu/Reset/Reset disturbances
The internal event list is reset under Reset menu in HMI tree.
Main menu/Reset/Reset internal eventlist
1MRK505209-UEN E Section 13
Reset
93
Operator's manual