ABB REB670 - Voltage Protection; Frequency Protection; Multipurpose Protection; Control

11.5.4 Voltage protection
Main menu/Test/Function test modes/Voltage protection
Test of two step overvoltage, two step undervoltage and two step residual
overvoltage protection.
11.5.5 Frequency protection
Main menu/Test/Function test modes/Frequency protection
Test of up to six instances of rate of change of frequency.
11.5.6 Multipurpose protection
Main menu/Test/Function test modes/MultipurposeProtection
Test of up to twelve instances of the general current and voltage function CVGAPC.
11.5.7 Control
Main menu/Test/Function test modes/Control
Test of synchrocheck and energizing check function as well as auto-reclosing
function.
11.5.8 Monitoring
Main menu/Test/Function test modes/Monitoring
Test of monitoring functions such as event counter and disturbance report.
11.5.9 Logic
Main menu/Test/Function test modes/Logic
Test of trip logic and event counter functions.
11.6 Function status
11.6.1 Overview
In the Function status section of the Test menu, data useful to the user in Test mode
can be found. The information available here is not limited to test applications
alone and provides information about the system as a whole.
Section 11 1MRK505209-UEN E
Test the IED
70
Operator's manual