ABB REB670 - Reset Guide for IED; Circuit Breaker SXCBR; Reset Autorecloser SMBRREC; Reset Busbar Protection Trip

13.2 Reset guide for IED
13.2.1 Reset busbar protection trip
13.2.1.1 Reset trip in Zone A (Three phase)
Main menu/Reset/Reset BBP trip/BBPZoneA3Ph(PDIF,87B)/BZNTPDIF_A:x
Resetting three phase trip in zone A is done here.
13.2.1.2 Reset trip in Zone B (Three phase)
Main menu/Reset/Reset BBP trip/BBPZoneB3Ph(PDIF,87B)/BZNTPDIF_B:x
Resetting three phase trip in zone B is done here.
13.2.1.3 Reset trip in Zone A (Single phase)
Main menu/Reset/Reset BBP trip/BBPZoneA1Ph(PDIF,87B)/BZNSPDIF_A:x
Resetting single phase in zone A is done here.
13.2.1.4 Reset trip in Zone B (Single phase)
Main menu/Reset/Reset BBP trip/BBPZoneB1Ph(PDIF,87B)/BZNSPDIF_B:x
Resetting the single phase trip in zone B is done here.
13.2.2 Reset counters
13.2.2.1 Reset autorecloser SMBRREC
The recorded number of reclosings are reset under Reset counters in the HMI tree.
Main menu/Reset/Reset counters/Autorecloser(RREC,79)/SMBRREC:x
In the dialog box that appears, choose YES to reset.
13.2.2.2 Circuit breaker SXCBR
The circuit breaker counter is reset under Reset counter in the HMI tree.
Main menu/Reset/Reset counters/CircuitBreaker(XCBR)/SXCBR:x
In the dialog box that appears, choose YES to reset.
Section 13 1MRK505209-UEN E
Reset
92
Operator's manual