1MDU07212-YN Rev. C Section 5
Use of LHMI
REF601 / REJ601 47
Application Manual
5.2.7 Menu – Configuration
· Submenu Configuration and respective submenus shows and allows depending
on the user right to change
· Blocking of particular protection stage or remote trip activation
· Relay configuration settings like sensor type selection and earth current
calculation method
· Inrush protection related settings
· Selection for loading factory settings (protection parameters only)
Remark:
· To modify configuration settings needs user rights of Admin user.
· To modify selected setting start with key
· To save changed setting with key .
· To discard and exit a modified setting with key
Following menu structure is used to navigate to the respective configuration
settings:
To Next Page
Loading...
