ABB Relion 670 series - Browsing Setting Values

IEC13000244-1-en.vsd
GUID-40BD0177-1CB8-48D6-B149-D25BD109C78F V1 EN-US
Figure 23: Example of a single-line diagram
2.
Select an object with
or .
Selection of an object is indicated with a square border that moves when
and are
used.
Switch objects can have additional icons that present the switch object states.
•
= Switch object is in substituted state.
•
= Switch object is interlocked.
3.
Press to select open or to select close the object.
4. Confirm the control operation in the dialog that opens.
5.
To move between the single-line diagram pages, press or .
Select the single-line diagram for the default view in
Main menu/
Configuration/HMI/Screen/SCREEN:1/DefaultScreen.
5.1.12 Browsing setting values
GUID-81116DC8-1E66-4144-920F-07C79F1C76B0 v6
1.
Select Main menu/Settings/IED Settings and press
.
2.
Press
and then to activate the setting group number selection.
IEC13000241-1-en.vsd
GUID-5196A07A-9DAF-4696-8773-F52ADC155C44 V1 EN-US
Figure 24: Selecting the setting group number
3.
Press or to select the setting group number.
4.
Press to confirm the setting group selection and to return to the Edit setting
group dialog.
5.
Press
to select Yes and to view the setting group values.
•
Press
or to select No and to exit.
1MRK 500 127-UEN D Section 5
Using the HMI
670 series 39
Operation manual