The through fault reports are exported into PCMDataBases folder as shown in Figure 49.
IEC18000091 V1 EN-US
Figure 49: PCMDataBases folder
7.1.5.2 Through fault monitoring using local HMI
GUID-389023C4-33B6-4CBC-AB9D-9B07127F84C0 v1
The list of saved through fault reports those are grouped based on the instance can be found
on the local HMI under Main menu/Measurements/Through fault reports. The reports list
contains date and time of the through fault and the latest report is displayed first. As shown in
Figure 50, the local HMI mapped inputs can be displayed by entering each through fault report.
IEC18000094 V1 EN-US
Figure 50: Local HMI through fault report view
Section 7 1MRK 500 127-UEN D
Operating procedures
62 670 series
Operation manual
To Next Page
Loading...
