ABB Relion 670 series - Page 73

IEC13000265-1-en.vsd
GUID-EFC7C47F-39D4-4C89-9672-55F338D63F4F V1 EN-US
Figure 56: Selecting the function category
6.
To browse the function blocks, scroll the list with
and .
Function blocks available depend on the application configuration. To move back to the
list, press
.
7.
To select a function block, press
.
IEC13000055-2-en.vsd
IEC13000055 V2 EN-US
Figure 57: Function block settings
The # character on the right indicates that the parameter belongs to a setting group.
8.
To browse the settings, scroll the list with
and .
9.
To edit the selected setting, press .
• In case of a parameter that is not part of a setting group, the parameter is
activated for editing.
• In case of a setting group parameter, the editing dialog shows the value of the
setting in all available setting groups, but the user can edit only the value in the
selected setting group. The active setting group is marked with an asterisk *.
1MRK 500 127-UEN D Section 7
Operating procedures
670 series 67
Operation manual