ABB Relion RER615 - Setting Protection Relay Parameters; Defining Setting Groups

Repeat the setting yearly, as the time for the DST shift is not on the
same date every year.
To disable the DST, set the DST in use parameter to "False".
8.4.4 Setting protection relay parameters
8.4.4.1 Defining setting groups
Selecting a setting group for editing
1. Select Main Menu/Settings/Edit setting group.
2.
Select the setting group to be edited with
or .
3.
Press to confirm the selection.
4. Edit the settings.
A070858 V3 EN
Figure 91: Selecting a setting group
Browsing and editing setting group values
1.
Select Main menu/Settings/Settings and press
.
2.
Select the setting group to be viewed with or and press to confirm the
selection.
Section 8 1MRS758754 B
Commissioning
126 REC615 and RER615
Operation Manual