1MAC254287-MB B Section 1
Introduction
REM615 ANSI 5
Point List Manual
sorted per function. The manual can be used as a technical reference during the
engineering phase, installation and commissioning phase, and during normal service.
The communication protocol manual describes a communication protocol supported by
the IED. The manual concentrates on vendor-specific implementations. The point list
manual describes the outlook and properties of the data points specific to the IED. The
manual should be used in conjunction with the corresponding communication protocol
manual.
1.3.2 Document revision history
1.3.3 Related documentation
1.4 Symbols and conventions
1.4.1 Safety indication symbols
Although warning hazards are related to personal injury, it should be understood that
operation of damaged equipment could, under certain operational conditions, result in
degraded process performance leading to personal injury or death. Therefore, comply fully
with all warning and caution notices.
Document revision/date Product series version History
A/01/20/2010 2.0 First release
B/03/31/2011 4.0 Contents updated for 615 series v4.0
ANSI release
Download the latest documents from the ABB web site
http://www.abb.com/substationautomation.
Name of the document Document ID
DNP3 Communication Protocol Manual 1MAC052460-MB
The caution icon indicates important information or warning related to the
concept discussed in the text. It might indicate the presence of a hazard
which could result in corruption of software or damage to equipment or
property.
The information icon alerts the reader to important facts and conditions.
The tip icon indicates advice on, for example, how to design your project
or how to use a certain function.
To Next Page
Loading...
Need help?
General
