ABB RET620 - IED Case and IED Plug-In Unit

48
153
177
160
262,2
246
GUID-89F4B43A-BC25-4891-8865-9A7F ED BB 84B9 V1 EN
Figure 9. Flush mounting
98
280
160
177
246
103
GUID-1DF19886-E345-4B02-926C-4F87 57 A0 AC3E V1 EN
Figure 10. Semi-flush mounting
48
4
82.
6
(
19"
)
1
6
0
2
46
1
7
7
1
5
3
GUID-D83E2F4A-9D9B-4400-A2DC-AFF0 8F 0A 2FCA V1 EN
Figure 11. Rack mounting
2
5
9
186
3
18
GUID-65A893DF-D304-41C7-9F65-DD33 23 91 74E5 V1 EN
Figure 12. Wall mounting
19. IED case and IED plug-in unit
For safety reasons, the IED cases for current measuring IEDs
are provided with automatically operating contacts for short-
circuiting the CT secondary circuits when a IED unit is
withdrawn from its case. The IED case is further provided with
a mechanical coding system preventing current measuring
IED units from being inserted into a IED case for a voltage
measuring IED unit and vice versa, i.e. the IED cases are
assigned to a certain type of IED plug-in unit.
Transformer Protection and Control 1MRS757846 A
RET620
Product version: 2.0
ABB 49