To Next PageTo Next Page
Need help?Do you have a question about the ABB S26 Series and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Manufacturer | ABB |
| Series | S26 |
| Measurement Range | Varies depending on model (e.g., 0 to 100% for level, various pressure ranges) |
| Output Signal | 4 to 20 mA, HART |
| Power Supply | 12 to 36 V DC (loop powered) |
| Accuracy | Typically ±0.1% of span |
| Operating Temperature | -40 to 85 °C (-40 to 185 °F) |
| Protection Rating | IP66/IP67 |
| Process Connection | Varies depending on model (e.g., threaded, flanged) |
Details the organization and content of the present manual for installing S26 diaphragm-seal transmitters.
Specifies that the manual is applicable to all S26 diaphragm-seal-equipped pressure transmitters.
Outlines general safety requirements and emphasizes observing manual information for safe operation.
Prohibits specific uses of the device, such as climbing aids or supports, to ensure safe operation.
Lists critical parameters like maximum working pressure and temperature that must not be exceeded.
Explains that misuse, disregard of manual, or unauthorized alterations void the manufacturer's warranty.
Covers safety precautions during inspection and maintenance, including housing opening warnings.
Explains the function of the seal system in isolating transmitters from process fluids and reasons for its use.
Describes how product code numbers identify specific features of the transmitter and seal system.
General information on applications and flexibility in selecting transmitter and seal locations.
Details horizontal and vertical installation of DP transmitters with remote seals for flow measurement.
Explains using DP transmitters with one or two seals for level measurement in open and closed tanks.
Describes using DP transmitters with two seals to measure interface level in tanks.
Explains using DP transmitters with two seals for measuring liquid density or specific gravity.
Details using gauge pressure transmitters with remote seals in process pipes or tanks.
Explains using absolute pressure transmitters with remote seals in process pipes or tanks.
Describes how transmitters with remote seals can be mounted using optional brackets or directly.
Details the S26WA and S26WE wafer remote seals, their design and connection types.
Describes S26RA, S26RE, S26RH, S26RJ rotating flange seals for flanged pipe fittings.
Details S26FA and S26FE fixed flange diaphragm seals designed for flanged pipe fittings.
Explains the S26TT off-line threaded connection seal and its connection via NPT.
Describes S26UN union connection remote seals used for pressure measurement.
Details S26SS sanitary diaphragm seals for food, sanitary, chemical, and pharmaceutical applications.
Describes S26KN integral seals for pulp & paper industry applications, ensuring reliable measurement.
Specific requirements for connecting the low side of the transmitter to atmosphere for open tanks.
Procedures for determining and connecting wet or dry compensating legs for closed tanks.
