1 Introduction
1.1 Instruction manual structure
The present manual provides information for installing the S26
diaphragm-seal-equipped pressure transmitters. Instructions
covering all aspects of the transmitters, which are not related to
installation of the remote seals, are included in the relevant
operating instruction. Please read this manual before working
with the product.
In case of additional information needs please contact ABB at
the address you find at last pages of this manual or at the web
site: http://www.abb.com/pressure.
The products described in the present manual are not intended
for use in NUCLEAR-QUALIFIED environments/applications.
1.2 Models covered by this manual
The present manual can be used for all the
diaphragm-seal-equipped pressure transmitters.
4 OI/S26-EN Rev. B | 2600T Series Pressure transmitters
To Next Page
Loading...
Need help?
General
