ABB SACE Emax 2 - Controller; Accessorizing Modules; Integrated Functions: Self-Diagnosis, Test and Power Controller

ABB | SACE Emax 2
Introduction to Ekip protection trip units | 1 - Presentation
33 | © 2017 ABB | 1SDH000999R0002 - ECN000058721 - Rev. B
Integrated functions: Self-
diagnosis, Test and Power
Controller
All the protection trip units for Emax 2 integrate:
• Self-diagnosis: continuous monitoring of the state of the internal and external connections, with signalling
of any faults that may occur.
• Test: checking of the protections and of the other functionalities.
In addition, trip units of the Ekip Touch series can be supplied equipped with Power Controller to regulate
the energy demand.
Dip Touch
Self-diagnosis
Test
Power Controller
DISTRIBUTION GENERATORS
Dip Touch Hi-Touch G Touch G Hi-Touch
The self-diagnosis and test functions for Ekip DIP are available starting from page 45.
Accessorizing modules
The Emax 2 circuit-breakers and Ekip trip units can be equipped as indicated in the combination tables on
page 53.
Various types of modules are available, differing in functionality and the position in which they are mounted
on the circuit-breaker.
The modules available for the terminal box of the circuit-breaker are:
Name Description Page
Ekip Supply Power supply module 62
Link Communication module 64
The modules external to the circuit-breaker are:
Name Description Page
Ekip Signalling 10K Signalling module 71
Ekip Signalling Modbus TCP Remote control and monitoring module 71
The supervision, configuration and reporting functions are, in addition, guaranteed by further modules for
temporary power supply and communication (test modules):
Name Description Page
Ekip TT Power supply and test module 70
Ekip T&P Power supply, communication and test module 69
Ekip Programming
Power supply, communication and programming
module
69
Ekip Bluetooth Power supply and communication module 69