ABB SACE Emax E4.2 - Accessorizing Modules

ABB | SACE Emax 2
Introduction to Ekip trip units | 1 - Presentation5 | © 2018 ABB | 1SDH001316R0002 - ECN000086018 - Rev. C
Accessorizing modules
The Emax 2 circuit-breakers and Ekip trip units can be equipped as indicated in the combination tables on
page 27.
Various types of modules are available, differing in functionality and in their position on the circuit-breaker.
The modules that can be connected directly to the electronic trip unit are:
Name Description
Ekip Measuring
Ekip Measuring Pro
Power supply, protection and measurement modules.
Ekip Signalling 4K Signalling module
NOTE: the Ekip Signalling 4K module is not available for E1.2 circuit-breakers.
The modules available for the terminal box of the circuit-breaker are:
Name Description
Ekip Supply Power supply module
Ekip Signalling 2K Signalling module
Ekip Signalling 3T Signalling module
Ekip Synchrocheck
Module for measuring voltage and synchronism between two
power sources
Ekip Com Modbus RTU
Ekip Com Profibus DP
Ekip Com DeviceNet™
Ekip Com Modbus TCP
Ekip Com Profinet
Ekip Com EtherNet/IP™
Ekip Com IEC 61850
Ekip Com Hub
Communication module
Link Communication module
The modules external to the circuit-breaker are:
Name Description
Ekip Multimeter Power supply and measurement module
Ekip Signalling 10K Signalling module
Ekip Signalling Modbus TCP Remote control and monitoring module
The supervision, configuration and reporting functions are, in addition, guaranteed by further modules for
temporary power supply and communication (test modules):
Name Description
Ekip TT Power supply and test module
Ekip T&P Power supply, communication and test module
Ekip Programming Power supply, communication and programming module
Ekip Bluetooth Power supply and communication module
Other accessories:
Name Description
Ekip LCD LCD interface for aggressive environments
Rating plug Module which defines the rated current In
Toroid S.G.R. External homopolar current sensor
Rc Toroid External differential current sensor
External neutral Current sensor on the external neutral
Ekip AUP Connected/isolated position contacts
Ekip RTC Contact for signalling circuit-breaker is ready to close