Operation Manual / TPL67-C.. - TPL71-C..
Page 33
© Copyright 2017 ABB. All rights r
eserved.
February 2017 HZTL2488_EN Revision D
3.1
A carefully designed and installed oil supply, which functions in all possi-
ble operational conditions, is an important prerequisite for trouble-free tur-
bocharger operation.
The turbocharger is normally lubricated with oil from the engine oil circuit.
With regard to the oil supply, please observe the engine builder's speci-
fications for lubricating oil selection, oil change intervals, oil filtration, oil
pressure and oil temperature.
Filtration of the lubricating oil using a filter mesh size ≤
mm is ade-
quate for TPL67-C turbochargers and a mesh size ≤
mm for TPL71-C
turbochargers.
This filtration can also be carried out using an additional self-cleaning
fine filter.
To Next Page
Loading...
Need help?
General
