Assembly Instructions / TPL67-C ... TPL71-C, TPL67VC
2 Safety / 2.1 Introduction
© Copyright 2020 ABB. All rights reserved. HZTL455311P0014_EN Rev.A July 2020
2 Safety
2.1 Introduction
State of the art
Turbochargers manufactured by ABB Turbocharging are state of the art and comply with the
pertinent safety and health-protection requirements that applied when the turbocharger
was manufactured. Consequently, the turbocharger is safe to operate.
CE conformity information
ABB turbochargers fulfil machinery directive 2006/42/EC and are considered partly com-
pleted machinery as defined by Article2g.
Residual risks
Nevertheless, during turbocharger operation and when working on the turbocharger, resid-
ual risks can exist which:
¡ Are caused by the turbocharger itself or its accessories.
¡ Are caused by the operating and auxiliary materials used.
¡ Are a consequence of insufficient compliance with safety instructions.
All instructions contained in this chapter must be observed during all work on the turbochar-
ger.
Responsibility of the operating company
In awareness of its responsibility, the operating company must ensure that only authorised
personnel work on the turbocharger, who:
¡ Correspond to the target group (see Definition of target group →2).
¡ Are versed in the general and locally applicable regulations for occupational safety and
accident prevention
¡ Are equipped with the prescribed personal protective equipment
¡ Have been instructed in the use of the turbocharger.
The safety-conscious work of the personnel and adherence to the assembly instructions
must be checked periodically.
Suitable working materials and personal protective equipment must be kept in a perfect
condition.
Page 5 / 21
To Next Page
Loading...
