ABB TPL85-B14 - Periodic Checking of the Pressure Vessel

Operation Manual / TPL85-B14/-B15/-B16
Safety
2
Periodic checki
ng of the pressure
vessel
2.8
Page 27
© Copyright 2016 ABB. All rights reserved.
May 2016 HZTL2491_EN Revision B
 Use tools and processes which keep dust to a minimum.
 Remove packing materials only in the work area.
 Take particular care when removing old insulating materials.
 Dispose of insulating materials properly and in an environmentally
compatible way in accordance with applicable local regulations.
Hazards due to electrical components
WARNING
Hazards due to electrical components
Electrical components operate with voltages which can present hazards
to humans.
 All work on or with electrical components may only be performed by
trained specialists.
 Heed any country-specific regulations.
Periodic checking of the pressure vessel
2.8
The pressure vessels used by ABB Turbo Systems, such as those for wet
or dry cleaning, are so-called "simple pressure vessels".
 The local, statutory regulations covering periodic checks of pressure
vessels must be observed.
 The operator is responsible for the safe operation of the pressure ves-
sel.
WARNING
Hazards from pressure vessels
The operator must keep the pressure vessel in a proper condition and
monitor it. Necessary repair or maintenance work must be carried out
without delay and the required safety precautions must be taken.
 Pressure equipment must not be operated if it has defects.
2.8