Tightening torques
To maintain the IP65 protection of the system and for optimal installation,
the following tightening torques must be used:
Service cable gland
20
M32 (ring nut fastening)
5.0 Nm
Service cable gland
20
M32 (lock nut fastening)
7.5 Nm
Front cover fastening screws
05
2.5 Nm
Screw for external ground connection
19
2.5 Nm
Overall dimensions
The overall dimensions are expressed in millimetres and inches and in-
clude the wall installation bracket.
418.0 mm
16.5”
553.0 mm
21.8”
180.0 mm
7.1”
To Next Page
Loading...
