Operating Instructions 6 CP650, CP660, CP675
Standards and Approvals
The Control Panels have been designed for installation and use in an industrial environment in compli-
ance with the 2004/108/EC EMC Directive and with the following harmonized standards:
EN 61000-6-4
EN 61000-6-2
In compliance with the above regulations the products are CE marked.
The installation of these devices into the residential, commercial and light-industrial environments is al-
lowed only in the case that special measures are taken in order to get the conformity to EN 61000-6-3.
Product Identification
The Control Panel products are identified by a product label. The label reports several information, includ-
ing the model name, the part number, the power supply, the date of production (in the following format:
ywwy) and two barcodes. The first code is the version code, the second one the serial number (S.N.).
Example of product label
Information on type plate (example)
ywwy – week and year of production
Version number of the product
Version number of the MicroBrowser (only valid for CP6xx-WEB)
To Next Page
Loading...
