Abbott Eterna 16000 - Regulatory Statements and Compliance; Battery Disposal Guidelines; FCC Compliance Information

Operaon is subject to the following two condions:
▪
This device may not cause harmful interference.
▪
▪ This device must accept any interference received, including interference that may
▪
cause undesired operaon.
Modicaons not expressly approved by the manufacturer could void the user’s
authority to operate the equipment under FCC rules.
Product Classicaon Statement (CISPR 11, Class B)
This product is class B equipment, which is intended primarily for use in the domesc
environment.
Idencaon Informaon for Product Registraon
This device has a label that contains, among other informaon, a product idener in the
following format.
Table 5. Registraon idencaon informaon
Idener Type Registraon Idener
FCC Registraon Number PX2-GMCHG1
Wireless Technology Informaon
The following table summarizes technical details of the wireless technology of the
charging system.
Table 6. Wireless technology informaon for charging system
Charging frequency 266 kHz to 320 kHz
Charging distance 0.5 cm to 2.5 cm
NOTE: Refer to Charging Your Generator (page 12) for instrucons to successfully align
and charge your generator.
Table 7. Bluetooth® Low Energy (LE) wireless technology informaon
Antenna type Chip Antenna
Antenna dimensions 7.00 mm x 2.00 mm x 1.20 mm
Modulaon GFSK
Output power (EIRP*) 1.5 mW (+2 dBm) typical
Duty cycle 14.1% or less over 6 min period
Range Up to 2 m typical
Center frequency 2.44 GHz
Channel frequency range 2.402 GHz to 2.480 GHz
19