10
Performing a Blood Glucose Test
Abbott Diabetes Care Ltd.
Range Road
Witney, Oxon, OX29 0YL
Made in UK.
Blood Glucose
Sensor Electrode
Abbott Diabetes Care Ltd.
Range Road
Witney, Oxon, OX29 0YL
Made in UK.
4˚C
Open the foil test strip packet at the notch and tear down to remove
the test strip.
Insert the Test Strip
With the contact bars (3 black lines) facing up, insert the test strip into the meter
until it stops. This turns on the meter.
Note: The meter turns o after 3 minutes of inactivity. Remove and reinsert the unused
test strip to restart the meter.
This display always appears when the meter is turned on.
Do not use the meter if the display check screen does not exactly match the
example. Contact Customer Service.
See “Preparing the Meter for Glucose Testing” section for more information.
Time and date (if set) appear next.
To Next Page
Loading...
