29
Hold the control solution drop to the white area until the meter beeps (if sound
is on) and the status bar appears on the display. This indicates the test strip has
obtained enough control solution.
The countdown appears on the display as the meter checks the glucose or ketone
level.
Note: Do not remove the test strip from the meter or disturb the test strip during the
countdown.
If the countdown does not start, remove and discard the used test strip, turn o
the meter and try again with a new strip.
View the Result
The meter beeps (if sound is on) when the result appears on the display. The test
is complete (examples shown). The result is stored in memory as a control solution
result.
Note:
appears with the result if performing a ketone control solution
test.
To Next Page
Loading...
