What to do: Apply and start a new Sensor.
Display: Check Sensor
What it may mean: The Sensor tip may not be under your skin.
What to do: Try to start your Sensor again. If you see ‘Check Sensor’ again on the
screen, your Sensor was not applied properly. Remove this Sensor and apply and
start a new Sensor.
Display: Sensor Ended
What it may mean: Your Sensor has ended.
What to do: Apply and start a new Sensor.
Display: Signal Loss
What it may mean: Sensor has not automatically communicated with the App in
the last 5 minutes.
What to do: Make sure your phone is within 10 metres (33 ft) of the Sensor and you
have not force-closed the App. Tap the
symbol for more information. Try turning
Bluetooth OFF then ON again. If that doesn't work, try turning your phone OFF
then ON again.
Display: Bluetooth O!
What it may mean: Bluetooth is turned o".
What to do: Go to your phone settings and enable Bluetooth.
To Next Page
Loading...
