Abbott Pima ANALYSER - Invalid Barcode Handling; Entry Validation Errors

9
1
2
3
4
5
6
7
8
Pima™ ANALYSER USER GUIDE
41
DO NOT use the barcode from a dierent cartridge when manually
entering the barcode. Manual input of barcodes will be documented on
the test result pages.
• If the cartridge barcode does not
encode for a test type uploaded
onto the Pima Analyser,
the following window is displayed.
For informaon regarding available test soware please contact your
local distributor.
Entry Errors
It is mandatory to enter Operator
and Sample ID to view a test result.
Aempng to conrm «blank»
entry elds for either Operator or
Sample ID will trigger the following
error messages.
• Enter valid Operator and Sample ID
to connue.
Should a new Operator ID be entered
into the Operator List, but an operator
with the same name / number
already exists in the list, the following
window is displayed.
• Press 〈 or ⌨ and pick a
dierent name / number for
the new operator.
2020-11-01 11:05
FAILURE
Invalid
barcode
2020-11-01 11:05
INVALID ENTRY
Operator is
required
2020-11-01 11:05
INVALID ENTRY
Sample ID
is required
2020-11-01 11:05
INVALID ENTRY
Operator
already
exists