16 Shortcuts
User’s manual
Chapter 3
SHORTCUTS
3-1Keypad shortcuts
Each keypad can be programmed with up to 4 shortcuts associated with 4
function keys .
The 4 keypad shortcuts can be activated in 4 different ways, as follows.
1. By ALL - press the respective key to , to activate the
shortcut instantly without code entry. The shortcut will affect all the
keypad partitions.
2. By ALL with confirmation request - press the respective key from
to and confirm the operation. If you press
the
shortcut will activate instantly, if you press or the operation
will be abandoned. This method protects against accidental opera-
tions. The shortcut will affect all the keypad partitions.
3. Code users only - press the respective key from to
then enter a valid code, the shortcut will activate after code recogni-
tion. The shortcut will affect the partitions common to both the key-
pad and code.
4. Code users only when activation of the shortcut lowers sys-
tem security - If a shortcut involves a scenario that completely dis-
arms a partition, or switches a partition from Away mode to Stay
mode, the security of your system will obviously be at risk, there-
fore, the system will request code entry. The shortcut will affect the
partitions common to both the keypad and code.
To activate a shortcut, press the key from to which
corresponds to the shortcut. The system will either activate the shortcut
instantly (case 1.) or will request confirmation (case 2.) or code entry
(cases 3. and 4.) before carrying out the operation.
To Next Page
Loading...
Need help?
General