Ability 510M User Manual

30 Shortcuts at default
User’s manual
Appendix B
SHORTCUTS AT
DEFAULT
n. description function parameter
1
Arm/disarm
Applies a pre-set scenario Scenario
2
Stop alarms
Immediately deactivates the outputs
relative to zone/partition alarm and
tamper events and system tamper
events.
3
Clear call queue
Cancels the call queue and stops ongoing
calls (if any).
4
Delete memory
Carries out a “Stop alarms” operation
and, at the same time, deletes memory of
system and partition alarm and tamper
events.
5
Activate outputs
Activates one of the programmed outputs. Output
6
Deactiv. outputs
Deactivates one of the programmed
outputs.
Output
7
Overtime
Delays auto-arming time of partitions by
30 minutes.
8
Teleservice req.
Sends a call to the Installer company
number (Teleservice number).
9
Arm/disarm menu
Accesses the User Menu section: Arm/
Disarm
10
Alarm menu
Accesses the User Menu section: Manage
alarms
11
Activations menu
Accesses the User Menu section:
Activations
12
View menu
Accesses the User Menu section: View
13
Keypad sett.menu
Accesses the User Menu section:Keypad
Keypad
14
ZoneBypass menu
Accesses the User Menu section:
Activations/Zones
15
Output control
Accesses the User Menu section: Outputs
ON/OFF
16
Enab.teleservice
Accesses the User Menu section:
Activations/Teleservice
17
Enable codes
Accesses the User Menu section:
Activations/Codes
18
Enable keys
Accesses the User Menu section:
Activations/Keys
19
Enable timers
Accesses the User Menu section:
Activations/Timers
20
Enab. auto-arm
Accesses the User Menu section:
Activations/Auto-arm
21
View events log
Accesses the User Menu section: View/
Events log
22
View alarm log
Accesses the User Menu section: View/
Alarms log
23
View faults log
Accesses the User Menu section: View/
Faults log
24
View arm ops log
Accesses the User Menu section: View/
Arm/Disarm ops.
25
ViewSystemStatus
Accesses the User Menu section: View/
System Voltage
26
View zone status
Accesses the User Menu section: View/
Zone status
27
Change PIN
Accesses the User Menu section: Change
PIN
28
Time/date setup
Accesses the User Menu section: Time/
Date
29
View faults
Accesses the User Menu section: View/
Faults

Ability 510M Specifications

General

Brand	Ability
Model	510M
Category	Control Panel
Language	English