3-16 Chapter 3
3-5. Integrated Peripherals
OnChip IDE Device:
Click <Enter> key to enter its submenu:
IDE Bus Master:
This option enables or disables the IDE bus mastering capability under the DOS environment.
On-Chip IDE-1 Controller:
This item selects whether to enable or disable the IDE-1 controller.
SATA Mode:
This item determines the mode for on-chip Serial ATA.
[IDE]: The on-chip Serial ATA served as IDE mode.
[RAID]: The on-chip Serial ATA served as RAID mode.
[AHCI]: The on-chip Serial ATA served as AHCI (Advanced Host Controller Interface) mode for
advanced performance and usability.
NOTE: The [RAID] option is only available when the item “OnChip Serial ATA” is set to [Enhanced
Mode].
AG8 Series
To Next Page
Loading...
