Abit AN-M2 - Raid Configuration

BIOS Setup
AN-M2/AN-M2HD 2-11
 IDE/SATA Function Setup
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
IDE/SATA Function Setup
IDE 1 Controller Enabled Item Help
IDE DMA Transfer Access Enabled
OnChip SATA Controller Enabled

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
IDE 1 Controller
This item allows you to enable or disable the IDE1 controller.
IDE DMA Transfer Access
This item selects the DMA mode for devices connected through IDE channels.
OnChip SATA Controller
This item enables or disables the onchip SATA controller.
 RAID Configuration
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
RAID Configuration
OnChip SATA Mode IDE Item Help
x - SATA1 RAID Disabled
x - SATA2 RAID Disabled
x - SATA3 RAID Disabled
x - SATA4 RAID Disabled

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults