BIOS Setup 3-21
3.6. PnP/PCI Configurations
Reset Configuration Data
When set to [Enabled], the BIOS will reset the ESCD (Extended System
Configuration Data) once automatically next time you boot up. It will then recreate a
new set of configuration data. But the next time you boot up, this option will
automatically be set as Disabled.
Resources Controlled By
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto(ESCD)]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the “IRQ Resources” menu.
User’s Manual
To Next Page
Loading...
