4.3 Mimic Display
【A】is Rectifier、【B】is Static Switch and 【C】is Inverter.
The faded pattern indicates this part isn’t activated.
The blue pattern indicates this part is activated.
The red pattern indicates this part is currently in an abnormal condition.
【D】Displays the bypass input measurements.
【E】Displays the mains input measurements.
【F】Displays the output measurements.
The abnormal measurements will have red background .
Click【D】【E】【F】 to change the measured parameter and press for 3 seconds to
enter to Real Time Information .
【G】Display the status of battery.
Press it for 3 second to enter to Real Time Information .
The battery isn’t connected.
The green pattern indicates the battery is charging.
The yellow pattern indicates the battery is discharging.
【 H 】 Alarm silence button. Click it to silence the alarm and press for 3 seconds to
enable/disable the buzzer.
Buzzer is enabled and Buzzer is disabled.
【I】Displays UPS internal temperature.
Press for 3 seconds to enter to Real Time Information .
【J】Overload counter
To Next Page
Loading...
