Do you have a question about the Ablerex TAURUS 20 kVA and is the answer not in the manual?
Essential guidelines for safe operation and handling of the UPS unit.
Recommendations for ideal storage and installation conditions to ensure UPS performance and longevity.
Details on how to secure the 10-40kVA UPS to the floor using fastening rail kits.
Instructions for floor fixing the stationary 60-80kVA UPS without wheels.
Steps for securing the 60-80kVA UPS with wheels to the floor using fastening rail kits.
Specifies minimum clearance distances required around the UPS for proper ventilation and maintenance.
Tables detailing maximum current ratings and recommended cable sizes for various UPS capacities.
Table specifying recommended circuit breaker ratings for different UPS models and input/output connections.
Wiring diagrams for parallel UPS setups using separate battery banks for each unit.
Diagrams for parallel UPS systems sharing a common battery bank.
Guidelines for parallel UPS operation using a common output transformer, advising against separate transformers.
Outlines the conditions and recommendations for connecting UPS units in parallel.
Wiring diagrams for 1+1 parallel UPS systems with single and dual inputs.
Diagram for N+1 parallel UPS setup with a single input power source.
Wiring for N+1 parallel UPS systems utilizing dual input power sources.
Explains the functionality and characteristics of the Normal, ECO, and Converter operating modes.
Describes the three power supply methods in online UPS operation: Normal, Bypass, and Battery modes.
Step-by-step guide for starting the UPS in Normal mode, including LCD display interactions.
Steps for connecting batteries and initiating the inverter to supply output voltage.
Instructions for cold starting the UPS using battery power and for shutting down the unit.
Procedures for transitioning the UPS to maintenance bypass mode from normal operation.
Steps to revert the UPS from maintenance bypass back to normal operating mode.
Guide on understanding alarm symbols and error codes displayed on the control panel for troubleshooting.
| Power Rating | 20 kVA |
|---|---|
| Real Power | 18 kW |
| Frequency | 50/60 Hz |
| Topology | Double Conversion Online |
| Transfer Time | 0 ms |
| Operating Temperature | 0°C to 40°C |
| Input Voltage | 380/400/415V AC |
| Output Voltage | 380/400/415V AC |
| Battery Type | Sealed Lead Acid Maintenance Free |
| Communication Interface | RS232, USB, SNMP (optional) |
| Humidity | 0% to 95% non-condensing |
| Battery Backup Time | Varies with load (typically provides several minutes at full load) |




