6. Troubleshooting
In the event of failure, the display area on the control panel will highlight the problem area
in red. The “Alarm” symbol will also blink to warn that there is a problem with the UPS.
Click to have an alarm list as below picture.
We recommend using the following method when troubleshooting to export the event log and
machine information from LCD panel to the SD card.
6-1. Export machine information from LCD panel
1. Make sure the SD card has been inserted on the LCD panel.
2. On the LCD, select →Management→Export→Export Unit Info and Settings.
3. On the LCD, it will indicate " Export Unit Info and Setting. ? ". Then select " Enter ".
4.Theinformation and setting data will be saved on SD card named
xxxx_KL_xx_IDx_xxxxxx_Inf.mch, please send it to your technical support.
To Next Page
Loading...
