10
Installing the mounting plate
Operator is to be installed on the transom, with the main switch located towards the hinge.
Use the mounting plate DA103 with the door operator ensuring the installation base is level and securely fi xed
to a fl at surface. Minimum requirement for wall profi le is 5 mm (steel).
Installation measurements for the standard arms DA147, DA148 and sliding arm DA149 to closing side.
Hinge line
63
296,5
530 593
28,5
28,5
13
41,5
70
83
39,5
10
Ø 10
Ø 10
Ø 10
Mounting plate DA103
Ø 30
To Next Page
Loading...