11
Assembly of the operator and the standard arm to the closing side
Hinge line
Mounting of the operator
M8x22 and washer
70
45
Min. 40
297
Y
90°
• After installation, ensure that the arm and door are properly adjusted.
• Mount a door stop to the door open position so that wind will not
drive the door against the wall, resulting in damage.
• Tighten the holding screw.
Mounting of the arm to the operator M8x30 and washer
Y (mm) Length of extension piece
0 No extension piece
10 10 mm (DA150/01)
20 20 mm (DA150/02)
30 30 mm (DA150/01, DA150/02)
40 40 mm (DA150/02 * 2 kpl)
60 60 mm (DA150/06)
Frame depth
Frame depth
DA147 0-150mm
DA148 150-250mm
To Next Page
Loading...