Abloy DA460 - Assembly of Operator and Sliding Arm (Opening Side)

13
• After installation, ensure that the arm and door are properly adjusted.
• Mount a door stop to the door open position so that wind will not
drive the door against the wall, resulting in damage.
• Tighten the holding screw.
Assembly of the operator and the sliding arm DA149 to the opening side
Mounting of the operator
M8x22 and washer
Hinge line
585
M
L
Y
Max. 25
Mounting of the arm to the operator M8x30 and washer
Y (mm) Length of extension piece
37 Ei jatkoakselia
47 10 mm (DA150/01)
57 20 mm (DA150/02)
67 30 mm (DA150/01, DA150/02)
77 40 mm (DA150/02 * 2 kpl)
97 60 mm (DA150/06)
DA149
Frame depth
Frame
depth
H/mm
Arm
distance
L/mm
Minimum
door width
M/mm
0-50
50-100
100-150
150-200
185
205
235
270
800
820
850
885