ABS P.RIDE - Page 49

49
English
6-A GRIFF DEAKTIVIEREN
7 HÖHENVERSTELLUNG AUSLÖSEGRIFF
7 HÖHENVERSTELLUNG AUSLÖSEGRIFF
8-A GRIFF LINKSHÄNDER SCHRITT 1
8-B GRIFF LINKSHÄNDER SCHRITT 2
STEP 5
Activate activation handle
You can store the activation handle on the shoulder
strap and it must remain fixed to the backpack. Open
the zip fastening on the shoulder strap. Move the
handle from the vertical OFF position to the horizontal
ON position to activate the system.
A system check is carried out when you move the han-
dle into the ON position. The battery charge status and
correct positioning of the inflator are checked. After 7
seconds of system checking, the top LED display flash-
es green every 3 seconds. The battery charge status is
displayed during the first 7 seconds (see drawing on
page 67). Once you have followed all the steps up to
this point, your ABS
®
P.RIDE System is ready for use
STEP 6
Deactivate activation handle
To deactivate the activation handle, push the safety
sleeve upwards and turn the activation handle to the
OFF position.
STEP 7
Height adjustment of the activation handle
Check when wearing the backpack if the activation
handle is positioned at the right height. The correct