Absen A27 Plus Series User Manual

- 21 - A27 Plus Series User Manual
5.2.2 HUB board maintenance
First, take down the 4 modules on the cabinet with the front service tool and put them in
place. Then, use a Phillips screwdriver to remove the fixing screws of the HUB board.
The HUB board can be removed from the cabinet
.
Note: The power supply behind the HUB board should be pasted with heat dissipation
glue. When all screws are removed, the HUB board should be pulled out of the cabinet
by hand.
Button
Fixing screw

Absen A27 Plus Series Specifications

General

Brand	Absen
Model	A27 Plus Series
Category	Monitor
Language	English