Absen A27 V3 Series - Preparation Before Installation; Installation Tools

A27 V3 Series Product User Manual
14
3 Preparation before installation
3.1 Installation tools
Installation
Tool List
Tool type
function
picture
knife
Open the cabinet
Hexagon
screwdriver
Install and remove the hexagon
socket screws
6mm T-wrench
Install the connecting plate
screws
5mm T-wrench
Install the "Z" axis adjustment
screw
Socket hexagon
wrench
Install the screws between the
LED cabinets
PH2 screwdriver
Maintenance and
disassembly
Module & power supply &
Multimeter
Measuring power cable and
distribution cabinet
Spirit level
Check the flatness of the
cabinet installation
Rubber hammer
Adjusting the flatness of the
panel structure
Front
maintenance
tool
Install& maintain the LED
module
Diagonal pliers
Handling cable ties when
arranging cables
tape measure
Measure the distance
Laser level
Measuring installation position